Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8531325

- Product Categories
- Friendly Links
Information Name: | Supply pump blade |
Published: | 2011-08-24 |
Validity: | 30 |
Specifications: | YTB-70 |
Quantity: | 1.00 |
Price Description: | |
Detailed Product Description: | YTB-70 is mainly used for mining, fuel generator sets and other equipment. Vane pumps, mechanical seals. Safe, reliable, cast iron pump body, anti-corrosion coating built 100micron filter for easy cleaning, cast aluminum motor system, protection until the level IP55. Failure and exclusion Fault 1, no oil pump Analysis: (1) suction line leak (2) The suction line is too long or too high suction (3) severe mechanical seal leakage (4) export pipeline in the state of closed die Remedy: (1) identify leak site, to be eliminated (2) reduce the absorption process, shorten the suction tube (3) the replacement of mechanical seals (4) the exhaust valve to open the export pipeline 2, pump out the fuel shortage Analysis: (1) speed is too low (2) adjusting the valve loose, deviate from the original position it is set (3) at both ends of the rotor wear face serious (4) The load is too large, the pressure exceeds the rated pressure Remedy: (1) adjusting the speed (2) re-adjust and tighten the (3) repair or replacement of the rotor (4) reduce the load 3, pump shaft power is too large Analysis: (1) the pressure is too high (2) speed too fast (3) assembly too tight, too much friction and power loss Remedy: (1) reduce the pressure (2) adjusting the speed (3) to re-adjust to ensure radial clearance face 4, heat pump Analysis: (1) load pressure is too high (2) low pressure relief valve works (3) severe bearing wear (4) two-phase transport, the gas too high Remedy: (1) reduce the load pressure (2) re-adjust the pressure of work (3) Repair, replace bearings (4) adjusting the proportion of two-phase 5, vibration, excessive noise, Analysis: (1) base instability (2) cavitation (3) wear sleeve (4) different from the pump and motor shaft (5) unsuitable working environment Remedy: (1) reinforcement (2) changing the work environment (3) the replacement sleeve (4) to adjust the concentricity (5) to re-adjust the work environment |
Admin>>>
You are the 5539 visitor
Copyright © GuangDong ICP No. 10089450, Mike Yongjia Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 5539 visitor
Copyright © GuangDong ICP No. 10089450, Mike Yongjia Machinery Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility